Hasselblad XPan II User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
27. Film plane index
- for critical focusing distance measurement.
28. Shutter release button
8
- for camera activation when pressed halfway
and shutter release when pressed completely.
29. Exposure counter LCD
- indicates number of unexposed frames left on
film and format indication. (Referred to in the
text as expLCD)
32. Shooting mode selector lever
- for choice between S, C and self-timer modes
(
).
Getting Started
Attaching the strap 4
With the buckle and retainer already attached to the
strap, pass the strap end first through the strap lug
on the camera, then through the retainer and finally
back through the buckle again. Allow at least 2-3 cm
of loose strap beyond the buckle. See the illustration
for details.
Loading the batteries 5, 6
Set the shooting mode selector to OFF. Unscrew the
battery compartment cap – situated on the baseplate
– counter-clockwise several turns by inserting a small
coin or similar in the groove. Insert two fresh batteries
(Lithium CR2- 3V) with the terminals positioned as in
the illustration. Replace the cap and screw clockwise
several turns until secure.
Not For Resale
Free Download at http://www.joe
-
chan.com/manual
s
The camera is wholly battery dependent and so it will
not function in any way if the batteries have been
omitted, are exhausted or have been fitted incorrectly.
Always use fresh batteries and do not mix old with
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Comments to this Manuals

No comments