Hasselblad H3D II User Manual download pdf (Page 19)

Carrying strap 1, 2

e carrying strap is attached by rstly withdrawing the safety

collar. e hook is then freed and attached to the strap lug (g. 1).

Slide back the safety collar (g. 2) to ensure the hook remains in

the locked position between the small protruding lugs. e collar

is purposely a tight t and might need some eort to slide.

Rechargeable battery grip

e Battery grip rechargeable 7.2V (3043348) is the standard

power source for the H3D II camera and is an environmentally

approved Li-ion type. e H3D II requires a power supply for all

actions as there is no mechanical reserve facility. When working

untethered, it is therefore advisable to keep the reserve battery

grip complete with fresh lithium batteries handy (if you do not

use a spare rechargeable battery grip). As is the case with most

batteries, problems might be encountered when used in very low

temperatures. In this situation it is advisable to keep the reserve

battery in an inside pocket, for example, to maintain it near body

temperature (both sorts of battery grips are referred to as the

‘battery’ in this manual).

Fitting and removing a battery 3, 4, 5

e tting and removing procedure is the same for both types of

battery grip.

Remove the battery from the camera by depressing the battery

holder button (A) and simultaneously swinging the battery holder

retaining lever (B) down until it stops. Pull the battery downwards

(C).

If you intend to store the battery separately from the camera you

should ensure that the safety cover is in place (to prevent short-

circuiting). It snaps into place and is removed by pulling outwards

and upwards on the locking clip (g. 4).

To t, hold the battery at against the camera body and aligning

the two upper lugs with the slot, slide it back into position as far

as it will go. Swing back the battery holder retaining lever until it

clicks back into place.



Please note if you want to use the rechargeable battery with

an H1/H1D model, the rmware in the camera must be version

8.2.2 or later for the battery grip to function properly.

The battery charger 6, 7

e battery charger unit is supplied with ve plug attachments to

suit various types of domestic electrical sockets available worldwide.

Other types of socket will require a domestic socket converter.

Attach the chosen plug (g 7) by sliding it into position, ensuring

that the two electrical contact prongs on the charger correctly

enter the two contact sockets on the plug attachment. Removal is

by the reverse procedure.

Please note the Battery charger BC-H Li-ion 7.2 VDC (3053568) is

designed for use with Battery grip rechargeable 7.2V units only.

1 2

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 128 129

Comments to this Manuals

No comments

Hasselblad H3D II User Manual Page 19

Comments to this Manuals

Related products and manuals for Supplementary music equipment Hasselblad H3D II