Hasselblad V10 Instruction Manual download pdf (Page 13)

1. Shutter speed ring

2. F-setting button

3. Warning mark

4. Depth-of-ﬁeld preview knob

5. PC-socket with positive lock

6. Central lens index

7. Focusing distance scale

8. Lens bayonet plate with red index

9. External and internal front bayonets

10. EV index

11. Exposure value (EV) scale

12. Shutter speed/aperture interlock button

13. Shutter speed scale

14. Aperture ring and scale

15. Depth-of-ﬁeld scale

16. Infrared focusing index

17. Focusing ring

The illustrations show the

CFE version of the 2.8/80

mm lens but the layout of

the parts is identical on all

CFi /CFE lenses.

Zeiss Planar CFE 2.8/80 mm

Attaching the lens 2, 3

Make sure that both camera and lens are fully wound. Illustration 2 shows the correct re-

lationship between the drive shaft, the lens drive coupling and their indexes. If the lens is

not wound, you can insert a small coin or similar in the coupling slot and rotate it clockwise

until it locks (about 4/5 of a turn) When you have aligned the red index on the lens with the

one on the camera (illus 3), the lens will drop easily into the bayonet ﬁtting. You can then

rotate it clockwise until it stops with a faint click as the lens catch locks it in place.

Shutter speed and aperture 1

The shutter speed selector ring is the ring located closest to the front of the lens. To set the

speed, turn the ring until the desired marked shutter speed position aligns with the central

lens index. The white scale shows the shutter speeds, and the orange scale the exposure

values (EV). The aperture setting ring is the second closest ring to the front of the lens. The

aperture value is also set against the central lens index. The diaphragm is automatic and

stops down to the preset working aperture at the start of the exposure sequence. Therefore

in the illustration, the exposure setting is 1/60 second at f/11.

The orange ‘F’ setting is used only when the lens is attached to a Hasselblad camera in the

200 or 2000 series with a focal plane shutter. The operation of the diaphragm is not aﬀected.

The ‘F’ setting can only be engaged/disengaged when the orange lever is pressed.

Note

If the F setting is used, exposure errors will

occur because the shutter remains open.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 91 92

Comments to this Manuals

No comments

Hasselblad V10 Instruction Manual Page 13

Comments to this Manuals

Related products and manuals for Film cameras Hasselblad V10