Hasselblad V10 Instruction Manual download pdf (Page 25)

Rear cover MultiControl (supplied)

The Rear Cover MultiControl (3051070) not only provides protection for the camera body

when a CFV or ﬁlm magazine is not attached but also provides ﬂash check facility for cameras

featuring TTL/OTF (described separately) as well as a vignetting check facility.

Checking for possible vignetting is useful when ﬁlter combinations, attachments or lens

shades are used, to ensure the optimum from the accessories without the risk of inadver-

tant vignetting.

With the cover in position you can see the so-called ‘exit pupil’ of the lens through the

small holes in the cover. A vignetting free lens has an exit pupil the exact shape of the lens

aperture. At maximum aperture there is slight vignetting with all lenses but at f/11 to f/16

the majority of lenses are free of vignetting.

Corner illumination is dependent on the size of the exit pupil. If the ﬁlter or lens shade

extends too far, the area of the exit pupil diminishes. The shading eﬀect of a professional

lens shade, for example, is optimal when it has been extended as far as possible without

causing any visible corner vignetting. The amount of this extension is dependent on both

the working aperture and the focusing distance for the lens used.

Use the following method when any kind of lens accessory is in place and you want to

ensure a result free from vignetting:

1. Fit the accessory. Remove the ﬁlm magazine but do not attach a Rear Cover

MultiControl just yet.

2. Set the shutter on a CF/CFi/CFE lens at the ‘F’ position and pre-release the camera to

open both the lens shutter and the auxiliary shutter. C/CB lens shutters should be set

at ‘B’ and a B exposure made. Use a cable release to lock the released position.

3. Look at the lens exit pupil. Use the stop-down button and change the aperture

noticing as you do so the changes in the size of the exit pupil.

4. Look now at an angle roughly in a line from the exit pupil to one corner of the

camera back opening. This helps in ﬁnding the exit pupil again when the RCMC is

attached, which can be troublesome with wide-angle lenses in particular.

5. Attach the RCMC and observe the exit pupil again.

6. Select the working aperture and stop down manually.

7. Set the approximate focusing distance.

8. See the diagrams for a fuller explanation of what you can now see through one of

the holes, and act accordingly.

In the diagrams, all exit pupils are viewed from

the image corners.

Diagram A

Exit pupil for a wide-

open lens

Diagram B

Exit pupil for a

vignette-free stopped

down lens

Diagram C

Exit pupil for a slightly

vignetted lens (no

visible eﬀect on the

image)

Diagram D

Exit pupil for a vignet-

ted lens (clearly visible

eﬀect on the image)

Viewﬁnders

A prism viewﬁnder with a 45° viewing angle that provides an un-reversed 2.5X magniﬁed

focusing screen image. The large eyepiece, especially suitable for users with eyeglasses,

has a diopter adjustment range of - 2 to + 1 diopters.

As the 503CW / 503CWD models are further developments of previous models, they feature improve-

ments and some diﬀerences in design. This means that certain older and now discontinued acces-

sories cannot be used and any forced attempt at mounting them may damage your equipment, so

please check carefully before trying. For example, the PM/PME 90 viewﬁnders and the ArcBody are

not compatible with the CFV-39 or CFV-50 for diﬀerent reasons but are both compatible with ﬁlm

magazine use. For complete and up to date information please visit our website - www.hasselblad.

com. The following list is just a selection (some are discontinued but may still be available).

Optional accessories

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 91 92

Comments to this Manuals

No comments

Hasselblad V10 Instruction Manual Page 25

Comments to this Manuals

Related products and manuals for Film cameras Hasselblad V10