Hasselblad V10 Instruction Manual download pdf (Page 74)

• Display:

This feature sets the Timeout (2-30 seconds) on the display, which behaves

very much like a screen saver on a computer.When the timeout is reached, the

display will be turned oﬀ, but the CFV will still be running, so it will immediately

respond to a press of the buttons. (Note the diﬀerence between Display ‘timeout’

and Power Down.)

This feature also sets the level of Contrast (on a scale of 1-10) on the display.

Usually, you should leave this set to the default level of 5, however in some view-

ing environments and/or with some types of images you may wish to increase

or decrease this value. A value of 10 provides maximum contrast; a value of 0

provides no contrast (a black screen). You can also help save battery power by

using a low value here.

This feature also sets the Brightness (on a scale of 1-10) on the display. This sets

the brightness shown on the screen. Usually, you should leave this set to the

default level of 5, however in some viewing environments and/or with some

types of images you may wish to increase or decrease this value. A value of 10

provides maximum brightness; a value of 0 provides minimal brightness. You

can also help save battery power by using a low value here.

• Date & Time:

An internal clock keeps track of the date and time. This information is used to

mark each shot with the date and time at which it was taken. It is also used to

label batches with the date on which each batch was created. (See note under

‘General overview of digital back’ about keeping the internal battery charged to

maintain Date & Time settings.)

• Sound:

Audio feedback helps let you know if each new image is exposed correctly. This

is described in Standard Instant Approval Workﬂow.

This menu item has Volume (choose between High, Low and Oﬀ), Key Click

(choose between On and Oﬀ) and Exposure Warning (choose between On

and Oﬀ).

• Mark Overexp.:

This feature helps draw your attention to areas of your images that are over-

exposed. When this feature is enabled, the single-image preview display will

highlight each overexposed pixel by ﬂashing it white and black.

Set this item to On to enable the feature; set to Oﬀ to disable it.

• Power Down:

To help preserve the charge of the battery, you can set the CFV to power down

after a speciﬁed period of inactivity. The eﬀect is exactly the same as though

you had pressed the oﬀ button on the camera. Once it has powered down, you

must turn the CFV on again before you can continue working. Set this to Never

to disable this feature (this is the default setting). Set to a value between 3 and

99 minutes to establish a time-out. (Note the diﬀerence between Display ‘timeout’

and Power Down.)

• Language:

The menu system can be displayed in any of seven languages. This menu item

enables you to select your preferred language for the menus.

USERINTERFACEmenuitems

The user interface menu includes both items and sub-menus. The following items are

available here:

MENU > SETTINGS > User Interface

By altering the User Interface settings, you can control the way the CFV interacts to suit

you and your preferred way of working. It also includes date and time settings.

Tip

To conserve battery power, change the

Time Out and Power Down settings.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 91 92

Comments to this Manuals

No comments

Hasselblad V10 Instruction Manual Page 74

Comments to this Manuals

Related products and manuals for Film cameras Hasselblad V10